Nitrile gloves are similar to latex gloves and PVC gloves. They are all protective gloves made of various rubber materials. Due to their excellent waterproof and chemical resistance, they are often used in chemical, catering, cleaning, medical and other industries. . We need to pay attention to the following tips when using nitrile gloves.
Tips for using nitrile gloves:
1. Nitrile gloves can effectively prevent organic solvents, and its main advantages are high strength and high elasticity. It is mainly provided to Shou Shao's regular stations exposed to liquid chemicals, such as chemical warehouses and alcohol cleaning. The main function of nitrile rubber is to prevent organic solvents, but it is not resistant to puncture. Therefore, extra care must be taken when using it. Do not pull and wear strongly. Therefore, when wearing nitrile gloves, it is required to wear Yarn gloves to reduce the wear of nitrile gloves and extend the service life.
2. When wearing nitrile gloves for some cleaning operations, because some products will have-some sharp edges, and these sharp edges are the easiest to penetrate the nitrile gloves, and once penetrated even a small hole , Enough to allow the cleaning agent to immerse inside the glove, making the whole glove useless. Therefore, in addition to requiring careful operation during use, you must also wear finger cots on the gloves.
AClean food grade nitrile gloves, high standards and high requirements
Method for cleaning silicone oil in nitrile gloves:
1) Cleaning solvent: select special non-ionic neutral surface cleaning agent for oil removal.
2) Proportioning concentration of solvent: the appropriate concentration can make the effect of removing silicone oil to the best; it should be determined according to the specific solvent.
3) Solvent cleaning temperature; proper temperature and temperature can make the solvent exert maximum cleaning efficiency; 45-50C is suitable.
4) Solvent cleaning time: the time should not be too short, otherwise the solvent can not be well compatible with silicone oil and affect the cleaning effect. It usually takes at least 30 minutes.
5) Rinse water quality: It is recommended to use RO/DI water to prevent cross contamination. In particular, the last few rinsing procedures must use DI water, otherwise the cleanliness cannot be guaranteed.
6) Rinse temperature: a certain temperature can better make the residual silicone oil precipitate from the glove surface.
7) Rinse time/times: each rinse time is about 5-10 minutes, the frequency is not less than 5 times.
8) Cleaning the dryer: Before drying the gloves, wipe the inner wall of the dryer with a clean cloth and solvent to avoid cross-contamination.
The above are some tips for the use and cleaning of nitrile gloves. You can clean the silicone oil on your nitrile gloves according to the above method, thereby extending the life of the gloves and keeping the gloves clean and performance.